DIY corrugated paper carnation step by step. How to make a carnation from colored paper with your own hands step by step

Every year, the whole country celebrates a great day - Victory Day! On this day it is customary to congratulate the participants of the Great Patriotic War, our dear veterans. And according to tradition, they are presented with bouquets of red flowers as a sign of attention, and most often these are bright red carnations.

If for some reason you do not have the opportunity to purchase fresh flowers, but you consider it obligatory to present a bouquet of carnations as a sign of gratitude to veterans, then there is an excellent solution - to make carnations with your own hands from paper.

In this article we have posted several simple master classes on making these wonderful flowers from paper. Choose what you like and start creating, because there is not much time left before the holiday.

How to make carnations with your own hands

And another option for making cloves from corrugated paper. For such a carnation, you need to cut out a large square from corrugated paper and fold it into a triangle (see photo). Then expand. This way you will achieve the desired texture on the paper.

Now start forming the bud. Take the center of the square and squeeze the paper like a folded umbrella. Pinch the paper a little further from the end with your fingers and turn the remaining paper inside out. Continue folding paper in this manner until you run out of paper. You should get a dense bud (see photo).

Insert a wooden kebab stick into the bud. Fix the bud on the stick and drape the stick itself with a strip of corrugated paper.

Spread the bud.

DIY carnations

DIY carnation made from corrugated paper

To create such a realistic flower, you will need live twigs (you can use branches of trees or bushes), corrugated paper, green adhesive tape, and scissors.

Make a long, wide strip of corrugated paper and gather it into a bun. Make triangular cuts on one side of the bunch with scissors to create the outline of the future carnation. Fix the bud on the opposite side. This can be done with glue, tape or thread.

Now attach the finished bud to the top of the branch. Secure the bud with green adhesive tape.

DIY carnation

DIY paper carnation

To make a carnation in this version, a wire was used on which a bud made of corrugated paper was formed. For reliability, a large bead is attached to the top of the wire, which allows you to fix the bud well.

The wire is draped with a strip of green corrugated paper, which is fixed at the top and bottom of the flower with glue or tape.

DIY paper carnations

How to make cloves with your own hands

Do you like to cut out snowflakes? Then this master class is right for you. To make carnations using this technique, you will need to cut corrugated paper or any other colored double-sided paper into squares of the same size. Then fold each square and make triangular cuts along the edge.

Then thread the finished elements onto a wooden kebab skewer. You can secure the bud and drape the stick with green adhesive tape.

For any of the above methods you will need:

paper - red and green. Depending on your choice, red can be a napkin, regular colored or corrugated paper, green - colored is most convenient. You can make carnations white, yellow, orange, but for Victory Day it is better to leave red,
scissors,
wire,
PVA glue.

DIY simple carnation

There are several easy options for creating paper flowers.

For the first, take a strip of red paper 5 cm wide, cut from the long side of an A4 sheet. Make cuts 3-4 cm deep, 0.5 cm apart. Wind this strip around the wire, gluing the layers, wrap the “stem” with green paper, and glue the cut out leaves onto it (it’s better to glue them in pairs so that they are thicker and stick better).

Photo: www.promaminky.cz

Second: take a folded napkin, fold it two more times to make a small square. Cut a circle out of it. Make cuts along the edges of the circle every 0.5 cm, carefully fluff the cloves, separating the layers with a needle. Ready flower It will be useful for decorating a postcard, just stick a strip of green paper under it. If you fluff it up properly, you can stick it on the wire.

Corrugated paper carnation

This material is ideal for flowers with wavy petals, since you can “sculpt” anything from it.

For example, take a strip half a meter long and 8-9 cm wide, fold it lengthwise with an aspect ratio of 1:2. Stretch the workpiece along the fold, it will take on a wavy shape - these will be the “petals”. Wrap the paper around the wire, add green - the carnation is ready!

Another option: take a sheet of corrugated paper approximately the size of A4, fold it like an accordion along the short side, the width of the workpiece is 2 cm. Smooth out the folds. Fold the resulting accordion in half and attach a wire in the middle. Trim the short, straight sides to create a sharp overhang. Now carefully straighten the petals, wrap the wire in green - and you have a carnation.

How to make a carnation from corrugated paper?

To make it you will need: wire, scissors, red and green corrugated paper, and quite a bit of free time. So, to make a carnation from corrugated paper, you need:

1. Cut out several circles of the same diameter (5-8 pieces) in red.

2. Stack these circles one on top of the other, in a column.

3. Carefully pierce two holes in the middle of this column:

4. Pull the wire through these holes:

5. Twist the two ends of the wire from the other side to make one stem:

6. Crush the red circles, thus forming the leaves of the flower:

7. Carefully straighten the petals so that it turns out beautifully:

8. The wire stem can be wrapped with a pre-cut strip of green corrugated

paper with several leaves (they are cut out together with the strip, they must be one piece with the strip).

Now our carnation is ready. By making several of these copies, you can get a beautiful bouquet. Add the St. George ribbon - and here you have a finished craft for May 9th! Or you can simply make a beautiful bouquet, put it in a vase and decorate the room.

P.S.: You can make petals easier: just take a strip of paper and wrap it in a circular motion around the core. As a core, you can use either a lump of the same paper or a bead threaded through a wire. In this case it will turn out about the same. And if you lightly cut this strip along the edges along its entire length, or make triangular cuts, then it will be completely difficult to distinguish it from real petals.

Many people associate carnations with the symbol of Victory Day. It is these flowers that can be seen in the hands of veterans, also at the eternal flame or memorial place. can be a great gift not only for holidays Great Victory, but also for other special occasions. All that remains is to figure out how to make a carnation from corrugated paper with your own hands.

A little history

Red carnations symbolize courage and are unspoken signs of freedom, fidelity, and shed blood. Since ancient times, this flower has symbolized the winner. This tradition originates in France; it was with these flowers that men went to war, and they received them from their lovers. Women waited for their spouses and grooms from the battlefields safe and sound. It is no coincidence that the ribbon decorating the Order of the Legion of Honor is red.

What you need for crafts

Before you begin, you need to have the following materials on hand:

paper of two colors (red and green);
scissors;
coil of wire;
glue.

A little trick. The paper does not necessarily have to be corrugated. You can take a simple napkin or a regular colored sheet. If we talk about the color of carnations, then red is ideal for Victory Day, but flowers can be white, yellow, orange, and any other color. It all depends on the choice of the needlewoman.

Simple clove option

There are several easy ways to make a paper flower. In the first case, everything will look like this.

How to make your own carnation from corrugated paper? Master class for beginner needlewomen:

A strip 5 cm wide is cut from red paper (or any other color). As for the length, it corresponds to the length of the paper.
Several cuts are made, maintaining a distance of 0.5 cm between them.
A piece is cut from a coil of wire equal to the length of the flower stem.
A strip of paper is wound onto a wire in several layers that need to be glued.
The stem is wrapped in green paper.
For greater resemblance to a real flower, it is recommended to make several leaves also from green paper and glue them to the stem.

What other options are there for making your own carnations from corrugated paper?

How else can you make cloves?

This method is very simple. Both children and adults will understand it. To work you will need a set of the following tools:

corrugated paper, one sheet of which will be the main color (as you plan to make the carnation) and the second green, to make leaves and stems;
scissors;
hot glue gun;
threads

Making carnations from corrugated paper with your own hands step by step

Anyone who has seen a carnation probably knows that there can be several flowers on one branch. Therefore, to make the craft look more realistic, it makes sense to prepare several flowers at once. So, to create one carnation you need:

Cut several strips with a width of 2.5 cm and a length of approximately 5 cm.
A petal is cut out from the strip.
Then stretch the workpiece and make small cuts along the edge.
To get a beautiful flower, you will need about 10 petals, the size of the bud depends on their number.
Fold the prepared petal into an accordion shape and repeat with the rest.
Each one must be tied with a thread so that it does not fall apart.
Once all the petals have been collected, the central part of the flower can be considered complete.
Then you will need to make a few more petals to form the outer part.
The length of the blanks is as in the previous version, only the width must be halved.
The petals are also cut out and stretched.
It is important not to forget to make small cuts along the top of the workpieces.
Petals are prepared in quantities of 10 pieces.
The outer petals are fixed around the core of the flower.

Your DIY corrugated paper carnation is almost ready.

How to collect a flower

The stages of collecting a flower are as follows.

First you need to make the sepals. For this part of the craft you will need green paper, from which a strip is cut.
Then the edges are cut in the same way as when working on a flower.
The upper part is stretched a little, and then a recess is made.
The workpiece must be twisted in such a way as to form a cup.
The flower is inserted into the sepal and secured with glue.

The strip is selected to the length required for the craft (selected individually), and the width is about 1.5 cm.
The workpiece is rolled into a tube, and the edge is secured with glue.
The flower is attached to the stem.
If you planned to make several flowers, then you will need sepals for each.
To keep the structure strong, all parts are glued.

Well, what is a flower without leaves? It's very easy to make them. Blanks with pointed ends, about 0.8 cm wide, are cut out of green paper. They are attached to the stems. The result is a beautiful DIY corrugated paper carnation.

Making beautiful paper carnations

The carnation is a flower that is invariably associated with victory. We carry it and give it to veterans on May 9th, placing them on monuments, remembering those who fell in battle. The image of a slight sadness is associated with the image of a carnation, although previously it, especially a red one, meant passionate love. Now she is more likely image of courage, perseverance and bravery- all the things that distinguished our soldiers during the war.

It’s not a sin to give this unusually beautiful and lush plant to your friend for her birthday; anyone will be delighted with a bouquet of carnations. But a living plant will wither and will not please the eye for long.

Maybe it would be better to make it from corrugated paper? Then you can decorate a postcard with such carnations, or decorate some kind of gift, and they, bright and life-like, will leave a long memory for the one to whom you give it.

In our article we will tell several ways to make cloves made from corrugated paper with your own hands.

Making a delicate bouquet of carnations

For this craft we will need:

Corrugated paper pink, red, white
Glue (it is better to use PVA glue)
Scissors
A little wire for the stem or you can use stems from store-bought artificial flowers
Green ribbon

Having collected everything you need, start the process of making carnations:

Cut a strip of corrugated paper about 4 centimeters wide. We fold it like an accordion.
We round the resulting volumetric square at the top with scissors.
Unfold the tape and take the wire that needs to be coated with glue. We wind our ribbon around it, forming petals and making our flower look like a living carnation.
We wrap green tape around the wire, securing the ends. You can use type tape.
All. If necessary, make the required number of flowers in the same way as this method. They don’t have to be packaged in any way; you can give them as a gift right away.

Strict red carnations

This manufacturing method differs from the first not only in the necessary operations, but also composition necessary materials for crafts:

Corrugated paper red, white and green
Scissors
PVA glue
Type tape
Skewers

Let's start creating our own carnations:

We cut the red or white corrugated paper into squares, each of which must be folded in half twice. The blanks need to be rounded at the edges with scissors.
For one flower you need to take four blanks. We cut each of them with fringe, leaving one corner untouched.
We apply glue to the end of the skewer and wrap it with a thin strip of corrugated paper of the same color as our workpiece. We secure a strip of corrugated paper with tape. We have the middle of the flower.
We string our round blanks onto a skewer from the other end and move them to the middle of the flower, securing them with glue, we form a bud.
We wrap the remaining part of the skewer with tape. We make leaves from green corrugated paper and glue them to the stem.
We create the required number of flowers in the same way. You can vary the sizes of flowers, getting amazing compositions.

Making cloves with candy

If you think that just a flower is not enough to completely surprise and delight a person, then make a real bouquet of sweets with your own hands. To do this you need to stock up:

Corrugated paper
Wooden skewers
Glue gun
Candies (no need to remove them from the wrapper)

Making a carnation with a candy in the middle is much easier than it might seem at first:

We attach the candy itself to the skewer using a glue gun.
Then we make a bud: we take a wide ribbon of corrugated paper, coat one edge of it with glue from a gun and attach the ribbon to the candy, as if wrapping it. When wrapping candy, make an overlap of a centimeter and a half. The edges of the ribbon may not be processed in any way, but you can make a fringe.
Having wound a sufficient amount of tape on a skewer, you need to bend and stretch the corrugated paper, giving its “petals” a wave-like shape.
That's all. Make a lot of these carnations and please your friends with an unusual, memorable and tasty gift.

Large carnation buds

If you want to create carnation buds, distinguished by special splendor, then use this method. It's even simpler than the first two.

We will need:

Corrugated paper
Scissors
Glue
Wire
Green ribbon

The procedure is as follows:

Cut a piece of tape that will be 45 centimeters long and 8 centimeters wide.
Bend the long edge of the strip three centimeters. We extend this edge and form “waves”.
Then we wind the corrugation onto the wire in “waves” upward. We fix the flower at the base with an invisible thread or thin wire.
We cut off the excess and wrap the wire with green tape.
Our carnation is ready!