DIY garage doors

Do-it-yourself garage door

Garage - for the car owner can be said to be a second home. Garage owners often live outside the city in their households, build garages near houses or simply attach them to houses. Regardless of the location of the garage, the safety of the car in it is provided by gate systems or simply gates, the design of which varies depending on the requirements for them.

Swing garage doors

Garage door classification: the best choice

Today you can find numerous varieties of gate structures, most of which entered the market in the recent past since the orientation of our economy to the technologies of Western countries.

• Swing garage doors- the most reliable and long-playing version of the gate presented today. By the way, this type of gate was used everywhere, both for garages and for other outbuildings. Over the years of use, the doors of this design have earned the trust of their tireless practice in various operating conditions. The design of such gates consists of a pair of leaves on frames and hinges in doorways, the leaves of which have tight closing, without gaps. It is not difficult to make swing gates on your own, and a simple mechanism will serve you for a long time.

• Sliding garage doors - This design of the gate began to be popular at the beginning of the 20th century. The gate consists of a single leaf, which in turn is shifted to the side parallel to the frontal wall. If the sash is not one, but two, then they move apart in two directions, and a single-line design can also be folded in sections. For unobstructed operation of the gate of this design, it is necessary to have free space in the front wall. In this regard, sliding gates are often installed in hangars and industrial enterprises. In residential buildings, they are installed not so much for entering the garage as for getting into the yard.

Garage doors up and down

• Up-and-over garage doors entered the market recently. Their design is nothing more than a rising canvas. Lifting amplitude - from floor to ceiling when fully opened, the canvas is parallel to the floor. These gates are equipped with a hinged-lever mechanism and a pair of guides. Gates of this type are convenient and do not take up free space. The lifting and turning principle of operation of these gates will come in handy if your garage is located in the southern region or it has heating.

Garage doors lifting - sectional

• Overhead sectional garage doors a kind of innovation for the CIS countries. First of all, this is a canvas based on sections that drive in and fold along the guides under the ceiling level when working to open. The advantage of these gates is that they are very compact.

• Roller garage doors are not often used in garage construction, as they are not able to provide the required reliability. They represent ordinary plates based on aluminum sheet. According to the principle, the role of the shutters is folded into the allotted place under the ceiling. You can safely install them only at protected facilities with heating.

Garage doors: type of gate

for subsequent installation in the garage, do not pay much attention to the appearance and equipment, but pay more attention to practicality.

DIY garage doors

Starting the construction of homemade garage doors, it is important to consider the basic requirements.

1. The vehicle must be free to exit. The dimensions of the gates are provided to exclude situations in which the machine can be scratched. The minimum distance between the machine and the gate must be at least 30cm.
2. Gates must be reliably protected from intruders, as a rule, the thickness of steel used in the construction of swing gates is from 2 to 5 mm. Additional reinforcement is possible with overhead locks.
3. The manufacture of garage doors should be carried out according to a well-thought-out and proven plan in order to avoid mistakes during construction. To avoid distortions, vertical locks for garage doors are used.

Swing garage doors - scheme

The simplest for an independent device are swing gates. To establish how to make them on your own from the beginning to the logical conclusion, it is quite possible to buy the material necessary for the garage device: corners, sheets and profiles. As for the type of size of future gates, as well as their design, you can plan ahead and make such a type of gate that you like.

Garage doors lifting - rotary: scheme

It is also possible to make lifting and turning systems on your own, but you cannot do without engineering knowledge for the correct selection of the counterweight and the manufacture of mechanisms. In many cases, gates of this type are purchased ready-made and mounted in a garage according to the manufacturer's scheme.

It is not possible to produce lifting-sectional ones on your own, as this will entail no small expenses, and a lot of time, plus the gates obtained in this way may not work correctly. Therefore, we strongly recommend that you purchase such gates from the manufacturer with his professional installation.