Connect digital tv box to vga monitor. How to connect a game console to a computer monitor


There are situations when we need another TV, but we cannot buy it for many reasons. Then the question arises - is it possible to use the monitor as a TV? Or is it possible to connect a TV set-top box to the monitor?

If you have an old computer monitor, then it is quite possible to use it as a TV. This transformation is achieved in several ways. The easiest of them, you guessed it, is to connect the monitor to the TV set-top box. You do not need a system unit, keyboard, mouse and various cords for them. What you need is nothing more than to connect the monitor to the digital TV box directly and use it only as a TV screen.

Connecting the set-top box to the monitor

Buying and connecting a DVB-T2 set-top box to your monitor is the surest way to miraculously transform your computer display into a TV receiver. Modern displays, like TVs, are equipped with built-in speakers and are almost a standalone device. But if you have a regular monitor (perhaps even a tube monitor), then you will need separate speakers - you will connect them to the appropriate connector on the DVB-T2 decoder. It would be great if they were in stereo. If desired, you can purchase speakers on the remote control.

An external digital set-top box is an independent device that connects to an electrical network, a television antenna and a monitor. It is controlled by a remote control, just like a regular TV.

The situation with DVB-T2 receivers is such that the manufacturer did not intend to connect them to computer monitors, but only to TVs. At the same time, new monitors, like modern television receivers, are equipped with an HDMI connector, which is present on bailiffs, while old ones can only be found with VGA and DVI-D.

The options for connecting it to a digital television set-top box will depend on what connectors you find on the display. The following combinations are possible (see table).

How to connect a TV box to a monitor

If you already have a free display, and you want to purchase a set-top box for watching TV, then pay attention to a hybrid digital TV tuner equipped with both VGA and HDMI slots. If the design additionally includes sockets - “tulips”, where you can connect speakers, then you are just lucky: you are the owner of a universal device that is compatible with various models of television equipment.

But what if you got a connection option with mismatched interfaces? Special adapters will come to the rescue, which are available in any electronics store or on a well-known Chinese trading platform. As for the latter, there you can find the most unexpected combinations of adapters. Some converters, being a full-fledged device with a board placed inside, require power supply. A feature of others is the need for a separate audio output using an additional cable.

Another way to connect an old monitor to a digital set-top box is to use the YPbPr or SCART jacks that work with an analog signal. To do this, you need a signal converter from AV to VGA format.

Pay attention to such a characteristic as the length of the connecting cable. Surely you know how the length of the antenna coaxial wire affects the signal attenuation. So, for cables connecting displays with a T2 decoder, there are requirements:

  • VGA - no longer than three meters;
  • HDMI - no longer than five meters;
  • DVI - not exceeding ten meters.

If after connecting all the cables (do not forget about the antenna) and turning on the devices in the network, the screen is empty or an error message appears, then this indicates a problem with one of the devices or cable incompatibility.

Connectors and ports of TV set-top box

To understand which sockets are used to connect a DVB set-top box to a computer monitor, you need to get acquainted with the types of connectors that this type of gadget is equipped with. It is noteworthy that depending on the class of the monitor and the year of manufacture of the set-top box, the set of connectors may differ. So take a close look at the back of your devices.

Antenna connector

Previously, it was the most important thing in our television receivers: an analog television antenna, video player or satellite television tuner was connected to it. Today it is used to receive digital terrestrial television using a classic external antenna.

HDMI

The HDMI multimedia interface is the most significant functional connector. It is responsible for the simultaneous transmission of digital video and audio. Media sharing does not result in loss of picture or sound quality. It is good, regardless of the connected devices, such as a monitor, camera, camera or player.

Euro/Scart

Thanks to him, older devices are compatible with more modern equipment. This is especially true for the situation with the lack of an HDMI connector. This connector has been used for many years, but will soon become a thing of the past.

USB

USB is a connector that can connect equipment such as a camera, webcam, flash drive, MP3 player, and even a smartphone. The USB input is determined by the version standard: the higher it is, the faster the transfer of multimedia from devices to the TV screen. Later receivers are USB 3.0. Today, the USB connector is the main parameter of any TV.

VGA

VGA transmits video from external devices to the TV, such as the image from the monitor to the TV screen. The connector is useful for older equipment that does not have an HDMI input (laptop or computer). Then VGA provides device compatibility, allowing you to transfer images.

DVI

DVI technology replaced VGA and was developed for connecting image display devices, the connector does not transmit an audio signal. The DVI and HDMI connectors are mutually compatible and can be combined with each other using the appropriate adapters.

Memory card reader

It is used to display multimedia on the TV screen of portable memory cards. More and more manufacturers offer this alternative and convenient solution - it's faster to use the reader directly, bypassing the USB port.

Ethernet/LAN

Ethernet/LAN connector or the local network is the main function that provides a TV connection to the Internet. Thanks to it, you can use a wired connection to access search engines, applications, services and all the online tools that Smart TV has.

Component input

The component input makes it possible to send a high-resolution analog image from other equipment directly to the screen being viewed.

Digital receivers are designed to receive a signal and display it on a TV screen. This means that few people wondered how to connect a monitor to a digital TV set-top box. However, today there are more and more such users, especially if they have an outdated TV that is not capable of broadcasting an image in HD format and a computer monitor that is idle. There are many ways to make a TV out of a monitor, and we'll talk about them.

Of course, some difficulties will still arise. For example, everything would be much easier if there were "tulips" at the computer screen. If you have a new set-top box and monitor, then the situation is simplified, since such models are equipped with an HDMI interface. Older versions connected via VGA and DVI-D, which is why problems arise.

HDMI and DVI-D interfaces are digital connectors with the corresponding quality of TV signal transmission. If the monitor is equipped with speakers, then you do not have to adjust the sound. However, the quality leaves much to be desired. Therefore, it is better to use acoustic systems.

Now we will try to set up the receiver and the computer screen in order to view terrestrial digital television in the highest quality.

Connection Compatibility Check

The essence of testing is that you need to check the availability of available screen and set-top box connectors. the main problem is that if you have an old monitor and a new tuner, or vice versa. The devices will have completely different ports, which makes it difficult to set up a connection.

However, difficult does not mean impossible. Today, you can easily purchase adapters. Mostly, it is with their help that the DVB T2 set-top box is connected to the monitor. For example, the adapter allows you to connect VGA and SCART or any other connectors.

It is clear that there will be no problems if you have a monitor and a receiver produced at about the same time. With a high degree of probability, we can say that they will be equipped with approximately the same ports.

Therefore, before connecting a set-top box to the monitor, be sure to first consider what interfaces you will use to implement this idea. Keep in mind that not all inputs transmit video and audio at the same time. Of course, the best option is HDMI. The easiest way is to buy an adapter to connect to a computer monitor.

Connecting the set-top box to the monitor

If you already have a free screen at your disposal, and you only choose a tuner for viewing “numbers”, then keep in mind that a hybrid receiver equipped with an HDMI interface and a VGA output will be the best option.

The design of some models is additionally equipped with "tulips", with their help you can connect speakers, an audio system. Naturally, such a device is universal, so the connection will be as simple and affordable as possible.

However, how to connect a TV box to a monitor if the devices have completely different interfaces? In principle, nothing complicated, you need to purchase special adapters. Such adapters can be easily bought at any radio electronics store.

Any Chinese online store will also offer an extensive range of various adapters for connecting a monitor and a digital receiver. Many converters are complete devices with a board, so they require a separate electrical connection.

Another characteristic feature of some adapters is the sound output using an additional cable. Also, sometimes when connecting a digital set-top box to a computer, YPbPr and SCART connectors are used, but they interact with an analog signal. Therefore, you will need an additional AV to VGA converter.

Particular attention should be paid to such a parameter as the length of the connecting cable. As in the case of coaxial cable, the length directly affects the attenuation of the signal. Therefore, the following requirements are put forward for the cords for connecting a digital set-top box to a computer:

  • VGA - up to 3 meters.
  • HDMI - up to 5 meters.
  • DVI - up to 10 meters.

If after connecting the cables, including the antenna, an error message appears on the screen, this means that one of the devices is incompatible with the other or with the cord.

The TV channels are tuned according to the standard principle. You need to use the remote control of the receiver to start an automatic channel search.

Other connectors and ports of the set-top box

To understand which ports will be used to connect the tuner to a PC monitor, you need to study all the interfaces that devices of this type are equipped with. The fact is, depending on the year of manufacture of the digital TV set-top box and the class of the computer screen, the set of connectors can vary significantly. In this regard, you need to carefully examine the rear panels of the devices for additional interfaces.

Antenna input

Until a certain time, this connector was given priority, so receivers of various price categories were equipped with it. As a result, the user could connect an analog TV antenna, satellite receiver or video player. Today, a classic external antenna, mainly decimeter power, is used to receive "digits".

HDMI

Perhaps this is the most significant and multifunctional multimedia interface. The connector allows you to simultaneously transmit audio and video signals through one cable. Co-transmission does not affect the quality of the content in any way, there is no data loss. As a result, the user can play files, hear clear sound and see Full HD pictures.

SCART

Thanks to the presence of this interface, older models are connected to more modern equipment. This is especially true for devices that are not equipped with HDMI. It has been used for a long time, so it will soon cease to be used.

USB

Another multifunctional connector, since it is equipped with a wide variety of equipment: cameras, web cameras, flash drives, MP3 players and smartphones. The speed of information transfer directly depends on the version of the interface (2.0; 3.0), of course, the higher it is, the better. Almost all modern receivers are equipped with USB 3.0, as are TVs. True, it will be useless for connecting a monitor, although it is possible to connect speakers through this interface.

VGA

The input provides image transfer to the monitor from external devices. Basically, it was previously used to connect a monitor to a computer, until it was replaced by more modern DVI and HDMI connectors. The interface will be useful to owners of equipment that is rather outdated. It is compatibility with older models of equipment that is the main advantage of VGA.

TV and monitor are interchangeable devices. To connect, you will need a cable and an additional tuner adapter. After that, you will be able to watch TV programs on the old computer display, even if it is a CRT tube. Let's figure out how to make a TV from a monitor with your own hands and, conversely, output a video signal from a computer to a TV screen.

Watching TV on the monitor

The monitor is very similar in design to a TV - only the TV signal receiver and sound system are missing. To watch TV, you will need to slightly re-equip it by adding a tuner, a TV set-top box, or changing the built-in board. Additional devices will receive a TV signal and display it on the display. If there are no built-in speakers, additional speakers must be connected.

Tuner

To connect, you need an external TV tuner. First, inspect the video monitor connectors - it's good if there is HDMI, but VGA is also fine. In the second case, you can purchase an HDMI-VGA adapter, but it’s better to immediately look for a tuner with a VGA port - it will cost you less than a bunch of tuner + adapter, and it will work more stable. If your device supports the DVB-T2/C standard, you can watch digital programs.

Some TV tuners have a built-in speaker - it cannot boast of high sound quality, but it is quite suitable for watching news in the garage or a series in the country. In this case, you won't need external speakers.

How to make a TV out of a monitor without a computer: connect the device with a cable to the tuner, insert the wire from the antenna. Connect the speakers, if you will use them, plug the TV tuner into a power outlet.

TV set-top box

Can I connect the monitor to the TV-Box that is used with the TV to add Smart TV functions to it? Of course! If the video monitor has an HDMI output, there will be no connection problems.

Older models, especially CRT tubes, will require an HDMI to VGA adapter. The VGA interface transmits only the image, without sound, so it is better to choose a model with an audio output. Through it, you connect active speakers to get a full-fledged TV.

Pay

If you are good at electronics, you can do without additional external devices by replacing the LVDS board in the monitor. Through the LVDS interface, the matrix is ​​\u200b\u200bconnected to the signal processor. You will need a board with a built-in video decoder, HDMI and USB connectors. You can also install the part in the service, but then paying for the services of the masters will block the benefits of buying an inexpensive component.

For self-installation, follow the steps:

  • disassemble the video monitor and disconnect the old board, carefully unfastening the cable;
  • connect a new board with a suitable cable or solder it;
  • provide for the refinement of the case so that a more voluminous part due to the decoder fits into it;
  • attach the IR receiver.

Connect TV to computer

It is comfortable to use a TV as a monitor if the screen of the device has a resolution of at least 1920x1080. Otherwise, the picture on it will be coarse-grained, it’s hard to look at it from a close distance. Before connecting, inspect the connectors on the TV and video card, the connection depends on their type:

  • VGA - via a VGA cable, to the Outut port on the computer and Input on the TV.
  • HDMI is a digital signal with the best quality.
  • DVI - before buying a cable, check the type of connector available (D - digital, A - analog, I - universal).
  • S-video - transmits an analog signal, normal quality.
  • Composite - low signal quality, you need a cable with "tulips". In the settings of the video card, set the image acquisition by composite.

If you want to use the TV as a second screen, the VGA port of the video card will be occupied by the wire from the main display. Then turn on the TV in the DVI connector through the DVI-VGA adapter, which usually comes with the video card.

Before connecting the cable, be sure to disconnect both devices from the mains!

When you managed to connect the TV as a monitor, go to the display settings by right-clicking on the desktop. Set the resolution at which the image will look the clearest. If you connected a TV in parallel with the main display, select the mode of their use - whether the image should be duplicated or the image will be extended to both screens.

Conclusion

The monitor and TV can easily replace each other, only minor alterations are needed. The cheapest thing is to change electronic components, but this requires a good knowledge of radio electronics. It is a little more expensive to buy or order TV tuners and set-top boxes in Chinese online stores that will display the TV signal on the display. Displaying an image from a computer to a TV screen is even easier - just buy a cable suitable for the connectors of the equipment.

Manufacturers of DVB T2 tuners expected that the equipment would be used exclusively with a TV. For this reason, the devices were not designed to be connected to a monitor. Let's try to figure out how to connect an LCD monitor to a digital TV set-top box in order to be able to:

  • extend the life of the monitor;
  • use a free monitor to watch TV.

Experts offer several schemes for using the monitor as a TV. The problem would not exist if the monitor had an RCA connector, like modern devices with HDMI for connecting to various set-top boxes. However, older models usually have VGA and DVI-D inputs to provide adequate audio levels.

You can improve its quality by connecting speakers. A more efficient solution would be to use an external speaker system, which requires a special cable to connect. At the same time, the sound will almost completely retain its characteristics coming from the receiver, without losing the main indicators.

To connect HDMI and DVI-D digital inputs, you will need an adapter of the corresponding connectors. The HDMI connector is considered the most efficient solution and is always recommended as a first priority. DVI-D output can be problematic if:

  • it supports HDCP technology, which provides protection against unauthorized copying;
  • a bad cable is being used.

In other cases, there will be no problems, although the quality of the transmitted picture and sound will be worse. Correcting this nuance is almost impossible, so you should be prepared in advance for a loss of quality.

Another option for connecting a TV set-top box to a monitor is to use the YPbPr or SCART connectors that support an analog signal. In this case, you will need to use a converter that converts the signal coming to the monitor from AV to VGA format.

Having studied the proposed options, each person will be able to choose the option of connecting a TV tuner for a monitor that suits him. If the above methods do not work or if it is technically impossible to implement them, the only option left is to use the system unit monitor. It is through him that it will be possible to receive a television picture and sound, the quality of which can be improved by the methods listed above.

If you are already ripe to make a purchase, then there are various TV set-top boxes in the TV Snab online store. The site presents set-top boxes from various manufacturers in a wide range of prices.

UPDATE! Guys, it will help you to connect the monitor to everythinghere is the adapter !!!

You bought an Android TV box and want to connect and test it as soon as possible. Before proceeding directly to this lesson, it is necessary to study the device in more detail. Next, we will take a closer look at the standard connectors that the devices are equipped with.

Connectors and ports of the TV set-top box

HDMI. All modern boxes have this connector. Its direct purpose is to connect to image output devices, such as monitors or TVs. An HDMI cable must be included with the set-top box. If it breaks, buying a replacement is not difficult in specialized stores. It is worth noting that this type of connector eliminates a lot of wires, due to the ability to transmit not only video, but also audio signal.

Analog (sound and video). Such exits are very rare. They are being replaced by HDMI. They are useful for connecting the device to an old model that does not have a digital interface. Tulip cables (wires with RCA connectors) are used to set up the connection.

USB. It is known to many users. They are equipped with all modern phones. It can be found on players, cameras and other gadgets. There are several options for USB. The most popular version is USB 3.0. Compared to its predecessor USB 2.0, it transmits the signal faster and better.

Outputs for audio. As mentioned above in the article, HDMI is capable of transmitting both sound and video. That's all it takes to use the TV box. But manufacturers still equip models with audio outputs, optical or coaxial. Sometimes there are both. They are referred to as Optical or SPDIF. If we are talking about coaxial output, then Coaxial.

lan. It is used so that the user can connect the set-top box to the worldwide network using a wire. This option is more reliable than a wireless connection. The signal is clearer and without interruptions. The RJ-45 type is often found on TV boxes.

Card reader. Dedicated slot for reading SD and SDHC cards. A card is shown next to it, so it is easy to find it on the device.

Nutrition. The port is required for all set-top boxes, regardless of model. The power adapter is connected to it. It has a round shape, and therefore it is difficult to confuse it with others. On the market, you can find options that receive electricity using a USB port: mini-USB or micro-USB.

Now you know more about modern Android TV boxes and what they are for. In addition to what is mentioned in the article, the devices are equipped with Bluetooth and Wi-Fi wireless interfaces. Be sure to read the instructions carefully after purchasing.

How to connect an Android TV box to a modern TV?

Let's start with the easiest and simplest thing, which will take only a few seconds. The market offers customers a huge range of modern TVs. In the article, under this designation, we mean the presence of an HDMI interface. First you need to find a connector with this designation on the TV. It is placed on the side or back side.

On all TV boxes, regardless of model, it is located at the back. You can not do without an HDMI cable, you will find it in the kit. Connect the cable connecting two devices and connect the power adapter to the box.

Didn't notice the image on the screen? Don't worry right away. In order for the picture to appear, you must select the display mode in the TV settings. If there are several ports, you must select the one to which the box is connected. Now you can pick up the remote control and control the device remotely.

How to connect a tv box to an old tv

Some users use a set-top box in order to get the most out of an old TV by extending its lifespan.

The question arises: how to properly connect these devices to each other?

Old TVs do not have an HDMI output, so you need to choose a TV set-top box that has analog outputs: white and red sockets - audio; yellow - video signal. The TV must have the appropriate connectors. For the image, you need tulip cords, at the end of each there are three plugs.

All required cables are used and properly connected. Using the remote control, set the necessary settings. On the TV, you need to start the video output function.
If you keep up with the times, it is recommended to choose an improved model. There are no outdated "tulips" in the new boxes for a long time. The cords needed when connecting to an old TV are rarely included. They need to be purchased additionally in stationary or online stores. Suitable 3.5 Jack-3RCA. On one side there are three "tulips" of different colors, on the other - a 3.5 connector. Three plugs are connected to the TV, single to the set-top box.

A variety of signal converters are commercially available. The most widely used model is HDMI2AV. Its price is about five hundred rubles. Boxing is attached to it, with the help of HDMI cable and TV, via 3RCA-3RCA cable. Based on the above information, the choice of connections is huge.

Are you sure you did everything right, but the image didn't appear? The problem may be a malfunction of the equipment, cables, adapter or adapters. If the warranty is not baked, the gadget will be replaced or repaired for free. Repairs must be carried out by a qualified technician. Without proper knowledge and skills, it is impossible to repair the device.

How to connect tv box to monitor

Initially, when specialists developed Android TV boxes, they were created specifically for TVs. Over time, given consumer demand and the development of technology, devices began to be actively connected to monitors. If you are using a monitor model with an HDMI connector, then there should be no problems. The procedure is the same as for the TV.

If the monitor is far from new, then the situation becomes more complicated. You will need the following connectors: VGA and DVI. Simply plugging in a cable and getting an image will not work. More work needs to be done.

To achieve the expected result, a special adapter is needed. The more common form is: HDMI-DVI, as well as. On one side, the adapter houses an electrical HDMI connector, on the other, VGA or DVI. Depending on which one you need. One end is connected to the set-top box, and the other end to the monitor.

If you did everything correctly, it is not certain that the image will appear. It is possible that the problem may be a low quality wire or copy protection - HDCP.

A more reliable method is to use an HDMI to VGA and Audio converter. Outwardly, this is a compact device, it costs a little, and you can find it in any thematic store. Easy to use. TV box, via HDMI wire, is connected on one side, and on the other side there are VGA or DVI connectors. There is also a separate branch with a 3.5 mm jack - a standard jack for speakers or headphones.

These are not all connection methods, but almost all involve the use of a converter. Before starting, check the condition of the connectors and cables, as well as the equipment used.



@ 2022 kvartalmuz.ru - Prefabricated buildings from A to Z